Used Car Warranties and Service
Protect your investment!

  Used Car Warranty

A Warranty Worth Having

Roberts4cars.com understands that your car is your livelihood. For this reason we fully service & MOT your new vehicle before it leaves our premises.

In the unlikely event that you do suffer a mechanical breakdown you will have the back up of a 3 month parts & labour warranty. This can be extended up to 24 months.

Contact us for more information.


  Used Car Servicing

Initial Checks

  • Check for damage to bodywork, trims, lamps, number plates, mirrors etc
  • Check timing belt interval

Vehicle on the ground

  • Check all interior warning lights and horn
  • Check condition and operation of all seatbelts
  • Check operation of interior and exterior lights and switches
  • Check front and rear windscreen wipers and washers
  • Check condition and security of windscreen and rear view mirror
  • Check fuel cap
  • Check air conditioning
  • Check & top up power steering reservoir
  • Check PAS, auxiliary and fan belts
  • Check pollen/cabin filter
  • Check battery condition and security
  • Check clutch operation
  • Check handbrake operation and travel
  • Check and top up gearbox oil/axle oil/transfer box oil (if applicable)
  • Check and top up all under bonnet fluid levels
  • Check and top up brake fluid
  • Check and top up anti-freeze
  • Check and top up clutch fluid
  • Lubricate door hinges, catches and locks (where required)
  • Check coolant system for leaks
  • Check engine cooling fan
  • Replace air filter
  • Replace fuel filter (diesel engines)
  • Replace spark plugs if applicable (at extra cost)

Vehicle raised off the Ground

  • Carry out under body inspection (check for any corrosion)
  • Replace engine oil (special or long life oils at extra charge)
  • Replace oil filter
  • Check condition and security of steering, suspension, mountings and gaitors
  • Check exhaust system for security and leaks
  • Check security of fuel lines, brake pipes, hoses and handbrake cables visually
  • Check for signs of leakage from cylinders / callipers (if applicable)
  • Check engine and gearbox mounts for wear
  • Test starter motor cranking operation and security
  • Visually inspect radiator and coolant pipes/hoses for security and leaks
  • Check all wheel bearings for noise / free play
  • Check condition of tyres and adjust tyre pressures (if required)
  • Check & record brake pads/shoes for condition & operation
  • Check & record drums and discs for condition and operation
  • Remove wheels & check condition and operation of front and rear brakes
  • Refit wheels (if applicable) / set wheel nut torque

Final checks

  • Carry out road test
  • Re-set service light (most models)
  • Stamp customer’s service book